Fluke’s Must Have Basic Test Tools
All equipment tends to wear out over due to heating, moisture, shock or vibration. This can lead to performance degradation. Therefore, every electronic testing facility needs to have the required equipment be it a simple multimeter or a complex oscilloscope. The testing equipment used to detect faults in operation of electronic devices by creating stimulus signals and capturing responses from electronic devices from under test is known as electronic test tool. If any faults are detected, then identified faults can be traced and rectified by testing tools. Fluke Corporation has manufactured electrical test and measurement instruments for decades, and these instruments for decades and these instruments have been well-known for accuracy, durability and great user-friendly interfaces. Maintaining those qualities, Fluke is now emphasizing electrical safety. Professionals encounter tough jobsite conditions every day and Fluke test tools are one of the life savers of most electricians for any job or regardless of what your trade requires. To give you an idea, we listed must have basic test tools from Fluke.
Fluke 971 Temperature Humidity Meter
Temperature and humidity are two important factors in maintaining optimal comfort levels and good indoor air quality. This instrument can quickly and conveniently take accurate humidity and temperature readings with the Fluke 971. The Fluke 971 is invaluable for facility maintenance and utility technicians, HVAC – service contractors, and specialists who assess indoor air quality. Through a few easy use controls, the 971 displays three different temperature points of the air surrounding the meter’s sensor: ambient, wet bulb, and dew point. Fluke 971 is the perfect tool for monitoring.
Features:
- Backlit dual display of humidity and temperature.
- 99 record storage capacity.
- Ergonomic design with belt clip and protective holster.
- Quick-response capacitance sensor with the twist-open protective cover.
- Compact and lightweight.
- Temperature range from -20 C to 60 C
- Relative humidity from 5% to 95%
- Min/Max/Avg data hold
- Low battery indicator.
Fluke 931 Contact and Non-Contact Dual-Purpose Tachometers
The Fluke 931 tachometer is a handheld tachometer, which integrates the retrieve and non-read promptness measurement functions and proficiently deeds the revolutions per minute (RPM) or surface readiness and distance when equipment needs quick troubleshooting to diagnose the problems. The 931 is the right tool for the job. It has the ability to contract measurement and non-contact combined. The Fluke 931 provides greater flexibility for the professional technician.
Features:
- 6-digit backlight display reads the data clearly.
- Signal detection reminder avoids invalid detection actions.
- Maximum/minimum/average value and final readings.
- Setting/Turning off the automatic power-off function.
- Small size and easy to hold.
- Easy switching of the contract and non-contract measurement modes.
- Different speed measuring heads and rotational speeds adapt to different measurement occasions.
- 1-year warranty.
Fluke 931 Contact and Non-Contact Dual-Purpose Tachometers
Fluke 377/378 FC Non-Contact Voltage True-RMS AC/DC Clamp Meters
Anytime an electrician or technician makes a voltage measurement on a live conductor, there is a risk of electrical shock. The new Fluke 377/378 FC Non-Contact Voltage True-RMS AC/DC Clamp Meters with iFlex minimize the risk because they are the only clamp meters that make accurate non-contact voltage measurement without test lead. The Fluke 377/378 FC created for industrial electricians and technicians with troubleshooting and maintenance responsibility. Technicians need to make electrical measurements in commercial and industrial environments and in keeping with the Fluke reputation and commitment to safety, these industrial clamp meters allow non-contact voltage measurements to be made, accurately using the FieldSense technology which senses electrical field in the clamp jaw for safe and accurate voltage measurement without metallic contact. Both voltage and current measurements can be viewed simultaneously on dual displays and complete 3-phase measurements 505 faster than other industrial clamp meters.
Features:
- Measure voltage and current with clamp jaw
- Faster, safer testing all without touching a live wire using FieldSense technology.
- Power quality indicator shows whether equipment or power line is faulty.
- Complete 3-phase voltage and current tests in three steps.
Fluke 1535 Fluke Large Screen High Voltage Insulation Resistance Tester
Fluke’s new high precision 2500V high voltage insulation tester is designed for demanding industrial users. The new design circuit can read the stable measurement data more quickly and work efficiently. The strict safety design of Fluke ensures that Fluke 1535 meet the CAT IV 600V standard and the power industry standard. This tool performs tests quickly, safely and accurately. Periodic insulation tests are mandatory to verify the integrity of coils and cables in motors, transformers, switchgears and electrical devices to ensure safety of personnel and assets. Fluke 1535 performs accurate and fast insulation tests, also providing advanced functions like ramp, voltage, polarity index, dielectric absorption ratio, which help to effectively find defects such as insulation breakdown and severe overheating and equipment ageing.
Features:
- Ultra large LCD display.
- Digitized insulation test with analogue bar graph.
- Preset test voltage: 250 V, 500 V, 1000 V, 2500 V.
- Insulation measurement.
- Dielectric absorption ratio (DAR)
- Automatic power off after 10 minutes of inactivity.
Fluke 1535 Fluke Large Screen High Voltage Insulation Resistance Tester
Other Interesting Articles from Chomar Uni-Trade